 |
|
Show prices
|
|
Carburettor Malpassi Filter King Carburettor kit Manifold Air filter Carburettor parts Solex 44 PAI Volvo Penta Service kits
Sortiment» KIT for SAAB V4 38/38 DGMS
KIT for SAAB V4 38/38 DGMS
KIT for SAAB V4 38/38 DGMS
Art.No: SAV4
Price: 599.50 EUR
Availability: In Stock
38 DGMS CARBURETOR KIT FOR SAAB V4
This carburetor kit replaces the original Solex TDID on SAAB V4 engines with a genuine Weber 38 DGMS. Designed as a direct-fit replacement, the carburetor is pre-jetted specifically for the engine and mounts directly to the original intake manifold.
The original throttle linkage from the Solex carburetor is reused. A performance air filter and all necessary installation accessories are included.
INCLUDED IN THE KIT
- Weber 38 DGMS carburetor
- Pre-installed jets suitable for SAAB V4
- Sport air filter
- Inline fuel filter (6/8 mm)
- Choke cable (Part No. 600)
- 2 x hose clamps
- 4 x mounting nuts (Part No. 3.810)
- 4 x washers (Part No. 3.820)
- 1 meter of 8 mm fuel hose
- Gaskets and plugs for mounting the air filter
JETTING CONFIGURATION (both barrels)
- Venturi (fixed): 27
- Auxiliary venturis: 4.0
- Main jets: 135
- Emulsion tubes: F50
- Air correctors: 185
- Idle jets: 50
- Pump jets: 55
- Needle valve: 2.50
- Float level: 14 mm (35 mm external), including gasket, plastic float
- Power valve: Included
FUEL CONNECTIONS
- Upper fuel port: Connects to fuel return line – includes a 0.5 mm bleed hole
- Lower port: Fuel inlet – 8 mm hose connection
Note: The Weber 38 DGMS is a direct replacement for the Solex TDID and also serves as an alternative to the Weber 40 DFI previously used on SAAB V4 engines.
If you have questions about compatibility or installation, contact MISAB for expert advice.
Art.nr: 600
Art.nr: 261580
Art.nr: 5-6550
Art.nr: 8601
Art.nr: SX241
Art.nr: SX722
Art.nr: 22680,005
Art.nr: 18930,086
KIT for SAAB V4 38/38 DGMS
ONE WAY FUEL FILTER
AIR HORN 45 DCOE 62 MM
CONVERTER FUEL PRESSURE
AIR HORN 40 DCOE 26 MM ALOY
AIR HORN WEBER 45 DCOE 26 MM ALOY
AIR HORN WEBER 40,44 IDF, DCOE 55 mm
UNION 1/4 NPT -> AN6
