	+46 (0)31 570500
	info@misab.se

Show prices

Shopping cart

PRODUCTS

Carburettor

Malpassi Filter King

Carburettor kit

Manifold

Air filter

Carburettor parts

Solex 44 PAI

Volvo Penta

Service kits

Paypal

Postnord

Sortiment» FILTER KING 8 mm STOR GLAS

FILTER KING 8 mm STOR GLAS

Art.No: FK7

Price: 136.00 EUR

Availability: In Stock

FILTER KING 8 mm LARGE GLASS

Malpassi Filter King pressure regulator with extra-large glass bowl – ideal for carbureted engines.

SPECIFICATIONS

Fuel connection: 8 mm hose nipple
Gauge port: Yes, 1/8" NPT (Gauge 305.1)
Recommended for standard carbureted engines

ADJUSTABLE FUEL PRESSURE

Fuel pressure is adjusted from the top. Remove the dome nut and loosen the locknut. Turning the screw clockwise increases the spring tension and raises the fuel pressure. Turning counterclockwise reduces it.

All FK1–FK7 models use the same pressure spring: TF67.

The FK7 is pre-set to deliver 0.25 BAR (3.60 PSI). However, most fuel pumps used in carbureted engines vary in pressure depending on vehicle model.

Fuel pressure depends on the fuel pump output. To ensure correct pressure, it must be measured and adjusted using a fuel pressure gauge.

The easiest way is to install our fuel pressure gauge (Part No. 305.1) directly on the regulator. The engine must be running during adjustment.

FILTER & MATERIAL

Paper fuel filter element
Extra-large glass bowl with increased fuel reserve (85 mm diameter)
Strong and durable glass bowl
Ensures consistent fuel flow to the carburetor – critical for smooth engine operation and reduced fuel consumption
Essential when using fuel pumps with output higher than 0.25 BAR on most carburetors

Mounting bracket and screws are included.

MISAB’s Filter King by Malpassi includes a 1/8" NPT port for fuel pressure gauge installation (e.g., 301.1). If unused, the port can be sealed with the included brass plug (Part No. 3.226). Use thread seal tape, Loctite, or similar for proper sealing.

SPARE PARTS FOR FK6 AND FK7