 |
|
Show prices
|
|
Carburettor Malpassi Filter King Carburettor kit Manifold Air filter Carburettor parts Solex 44 PAI Volvo Penta Service kits
Sortiment» FUEL PRESSURE REG. 6-8 MM
FUEL PRESSURE REG. 6-8 MM
FUEL PRESSURE REG. 6-8 MM
Art.No: FK3
Price: 119.00 EUR
Availability: In Stock
FILTER KING 6–8 mm ALUMINUM CUP
Malpassi Filter King pressure regulator with aluminum bowl – suitable for carbureted engines.
SPECIFICATIONS
- Fuel connection: 6–8 mm hose nipple
- Gauge port: Yes, 1/8" NPT (Gauge 305.1)
- Recommended for standard carbureted engines
ADJUSTABLE FUEL PRESSURE
Fuel pressure is adjusted from the top. Remove the dome nut and loosen the locknut. Turning the screw clockwise compresses the spring, increasing fuel pressure. Turning counterclockwise decreases it.
All FK1–FK7 models use the same pressure spring: TF67.
The FK3 is preset to deliver 0.16 BAR (2.20 PSI), but since fuel pumps vary by vehicle, the pressure must be adjusted during installation.
We recommend installing our fuel pressure gauge (Part No. 305.1) directly on the regulator for easy setup. The engine must be running during adjustment.
FILTER & MATERIAL
- Paper fuel filter element
- Robust aluminum bowl approved for use in race cars
- Ensures consistent fuel flow to the carburetor – crucial for stable engine performance and reduced fuel consumption
Mounting bracket and screws are included.
MISAB’s Filter King by Malpassi includes a 1/8" NPT port for attaching a fuel pressure gauge (e.g., 305.1). If you don’t use the port, seal it with the included brass plug (Part No. 3.226). Use thread seal tape, Loctite, or similar for sealing.
SPARE PARTS
- FL67 – Paper fuel filter
- FLI67 – INOX/metal fuel filter
- GP67 – Glass gasket
- FF67 – Filter spring
- GL67 – Glass bowl
- PL67 – Aluminum bowl
- 303 – Mounting bracket
- KM67 – Dome nut
- LM67 – Locknut for dome
- FM67 – Diaphragm
- FP67 – Filter gasket
- TF67 – Pressure spring
Art.nr: FGA100
Art.nr: 480532
Art.nr: FK2
Art.nr: FK5
Art.nr: FK4
Art.nr: FK6
Art.nr: FK7
Art.nr: 261560
Art.nr: 261580
Art.nr: 305,1
IDLE MIX SCREW
ELEMENT AIR FILTER 6000
IDLE SCREW SPRING
SERVICE KIT WEBER DGAS/DGES
MAIN JET WEBER DCD, DGV, ICH
Brass float for DCOE
FUEL PRESSURE REG. 6-8 MM
GASKET for DGV, DCD
